8
STEP 8
□
Insert the
Axle Rod(22)
though the holes in the
Right Legs
as shown.
□
Slide the
Wheels(20)
onto the
Axle Rod(22)
and secure using
Split Pin(D),
packed in blister pack. Note: make
sure the side of the wheels with the depressed hole for the Hubcaps in the center is facing outward as shown.
Snap the two
Hub Caps(24)
onto the ends of Wheel assembly as shown.
STEP 9
□
Place the
Main Firebox (14)
onto the leg assembly with the smoker opening on the same side as the wheels.
□
Tightly secure the
Main Firebox
to
each Leg Top
using
four M6x40mm Bolts(B)
and
four M6 Hex Nuts(E)
. Do
not fully tighten bolts yet.
22
20
24
14
