10
STEP 12
□
Insert
two M6x10mm bolts(A)
through the holes in the
Offset Support(31)
. Secure using
two M6 hex nuts(E)
as shown.
Now go back and fully tighten all nuts and bolts from STEP 4 onwards.
STEP 13
□
A helper is needed for this step.
□
Insert
six M6x10mm bolts(A)
through the holes in the
Offset Hood & Lid (32)
and through the
Main Firebox
.
Secure firmly using
six M6 hex nuts(E)
as shown. It's best to do nuts and bolts one at a time loosely first. Once all
nuts and bolts are connected, then tighten all six firmly,
31
32
