Barbecook MAGNUS ORIGINAL BC-CHA-1067, Manual

Page: 18 / 77

www.barbecook.com
18
Material Symbol
Cast iron
Powder coating
Plastic
9. ORDERING SPARE PARTS
Parts that are exposed to fire or intense heat will eventually
need to be replaced. To order spare parts:
1. Find the reference number of the part you need. There is a
list of all the reference numbers under the exploded drawing
in the second part of this manual and on www.barbecook.
com.
2. If you have registered your appliance online, the correct list
will automatically appear in your MyBarbecook account. You
can also order spare parts via your account.
3. Order the spare part via www.barbecook.com or at your
point of sale. Parts under warranty can only be ordered via
your point of sale.
10. WARRANTY
10.1. Covered
Your appliance has a two-year warranty, starting from the date
of purchase. This warranty covers all manufacturing defects,
provided that:
- You have used, assembled and maintained your applian-
ce according to the instructions in this manual. Damage
resulting from misuse, incorrect assembly or improper
maintenance is not regarded as a manufacturing defect.
- You can present the receipt and the unique serial number
of your appliance. This serial number starts with a C follo-
wed by 15 digits. The serial number is stated:
- on this manual
- on the appliance’s packaging
- on the bottom of the foot of the appliance
The Barbecook quality department will confirm that the parts
are defective and that they proved defective under normal
use, correct assembly and proper maintenance. If one of these
conditions is not fulfilled, you are not covered by the warranty.
In all cases, the warranty is limited to the repair or replacement
of defective parts.
10.2. Not covered
- The following damage and defects are not covered by the
warranty:
- Normal wear and tear (rust, deformation, discoloration
etc.) of parts that are directly exposed to fire or intense
heat. These parts will need to be replaced from time to
time.
- Visual irregularities that are inherent to the manufacturing
process. These irregularities are not regarded as manu-
facturing defects.
- All damage caused by inadequate maintenance, improper
storage, incorrect assembly or modifications made to the
pre-assembled parts.
- All damage caused by the misuse of the appliance (not
using it according to the instructions in this manual, using
it for commercial purposes, using it as a fire basket etc.).
- All consequential damage caused by careless or non-
compliant use of the appliance.
- Rust or discoloration as a result of external factors, use of
aggressive cleaning products, exposure to chlorine etc.
This damage is not regarded as a manufacturing defect.