background image

25

EVO 100-50

Instructions for use 

MAINTENANCE

•  Emptying the ashtray  

•  Regularly check how much ash is in the ashtray. 

   

 

•  Make sure the ashtray is never more than ¾ full. 

   

 

  If the ashtray is more than ¾ full, it can obstruct 

   

 

  the fl ow of air to the appliance.

   

 

•  Wait 24 hours after stoking before emptying the  

 

 

  ashtray.

•  Cleaning the glass  

•  Regularly clean the glass on the inside of the  

 

 

  appliance with glass spray or ceramic hob cleaner. 

   

 

  Attention !!  If the glass is not cleaned on time, 

   

 

   

this can result in becoming dull and  

   

 

   

diffi cult, if not impossible, to clean.

   

 

•  If the glass is broken or cracked, it must be 

   

   

 

  immediately replaced before operating the 

   

   

 

  appliance again. 

   

 

   

Broken ceramic heat-resistant glass  

   

 

   

may not be thrown away in a glass  

   

 

   

container, but must be included in 

   

 

   

normal household  waste.

•  Cleaning the appliance  

•  Wait for the appliance to cool down suffi ciently  

 

 

  before cleaning. Never use scouring powder,   

 

 

  aggressive cleaners or fi re polish on the appliance.  

 

 

  Use only a dry lint free cloth.

   

 

•  Regularly remove any dust deposits from behind 

   

 

  the door by means of a vacuum cleaner.

•  Door seals 

Check annually before heating is resumed.  

 

 

 

Replace as necessary.

•  Sweep and inspect 

Annually before heating is resumed.

  chimney

•  Appliance interior 

Check annually.

   

 

*  Replace panels as necessary.

 
•  Grate 

Check annually for cracks / breakage.

•  Sliders/dampers 

Check function annually.

•  Convection channels 

Clean annually.

Summary of Contents for EVO 100-50





































Reviews: