barbas CUATRO-3 75, Installation Instructions & Manual For Annual Maintenance

Page: 9 / 72

9
CUATRO-3 75
Installation instructions
Installation instructions
• The appliance may only be set up if the appliance and location meets the
- national and local installation regulations;
- local fi re brigade regulations and required architectural provisions.
• Ensure that the room in which the appliance is situated has adequate ventilation.
• Wood and wood briquettes may be stoked in the appliance.
Do not use any coal and liquid fuels or fuel gel in the appliance. The appliance is
not intended for use of this fuels and can be dangerous and lead to damage to your
health and may seriously damage the appliance.
• Never use the appliance to burn rubbish.
• Please read all instructions / stickers on and around the appliance.
• Read the “Directions for use” before using the appliance for the fi rst time. When you
fi rst fi re up your appliance, there are a number of extra points you should take into
account.
• In transit, some parts of the appliance may have moved from their original place.
Check that the door opens and closes, the brake plate is fi tted correctly to the
brackets at the top of the appliance, the heat-resistant panels are fi xed to the walls
and the panels on the bottom have not moved. Check if there are no foreign objects
in the appliance.
• Avoid over-loading (white burning glow), caused, for example, by lengthy burning
with primary air (combustion air supply slider all the way to “
+
”) or by burning too
much wood in one go. The appliance can then become over-heated.
This may damage the metal fl ue gas fl ap.
• Ask for the local building regulations, before commensing the installation of the
appliance.