background image

®

SETTE 270W

i MANUAL

v2.4 August 27, 2019

14

WARRANTY & SERVICE

U.S. & CANADIAN WARRANTY INFORMATION

Limited Warranty for Baratza Grinders is 1 year from the original date of purchase. This warranty covers all defects in 

materials and workmanship (parts and labor) including free ground transportation to and from our repair facility within 

the US and Canada. This warranty does not apply to: improper use, lack of cleaning, abuse, normal wear and tear, lack of 

proper adjustment, foreign objects (stones, screws, etc.) in the beans, or uses outside the intended use of grinding whole 
roasted coffee beans. If your grinder fails within one year, email 

[email protected]

 or call 425-641-1245. For additional 

warranty, support, or troubleshooting information, go to 

baratza.com

.

INTERNATIONAL WARRANTY INFORMATION

For all countries outside the US and Canada, the warranty, support and service is provided by the International Retailer you 
purchased from. If you purchased this grinder from a retailer outside of the country you live in, you may be responsible for 
any shipping costs to service the grinder, and you may need to pay for service.

PROOF OF PURCHASE AND PRODUCT REGISTRATION

You can register your grinder at 

baratza.com/register-your-grinder

. Registration will enable us to contact you in the unlikely 

event of a product safety notification and assist us in complying with the provisions of the Consumer Product Safety Act. 

The serial number is located on the bottom of the grinders. Please keep your sales receipt that shows the date of purchase.

INFORMATION ON REPAIRS OR QUESTIONS

Contact: 

baratza.com/contact

For Parts and Information go to: 

baratza.com

For Troubleshooting Videos: 

youtube.com/user/Baratzallc1

Summary of Contents for Sette 270Wi















Reviews: