![background image](http://html.mh-extra.com/html/baratza/sette-270wi/sette-270wi_user-manual_3049451008.webp)
®
SETTE 270W
i MANUAL
v2.4 August 27, 2019
8
PULSE FUNCTION/MANUAL MODE
The Sette 270W
i
also has a pulse function/manual weight grinding
mode. To turn the grinder on in this mode, simply hold ‘’START’’
for more than two seconds. The Sette will flash “P”, then it will
show 0.0, indicating that the scale has tared. Pressing and holding
‘’START’’ again will engage the motor. The grinder will count up
as it measures ground coffee, and will cease grinding as soon as
‘’START’’ is released. At this point, the ‘’START’’ button is now a
pulse button. To exit this mode, press STOP.
SOFT RESET FUNCTION
The soft reset function serves to erase the grinder’s “memory” of previous grinds. This is useful if the grinder has not reached
an accurate dose weight after 3-4 grinds (on a single grind setting), or after making a significant change in grind setting (15+
macro settings). Erasing the record of previous grinds allows the software to start learning with a clean slate. Each preset (1,
2 & 3) has its own independent “memory”, so the Soft Reset function is specific to a single preset.
To perform a Soft Reset on a specific preset, make sure the desired preset is selected. Then double tap the PLAY button. The
grinder will flash “CC” then immediately grind the preset dose. From this dose forward, the grinder should reach accuracy
within 3-4 grinds, as long as the grind size is not changed.
SINGLE POINT CALIBRATION
The 270W
i
scale is calibrated at our factory and is ready to grind out of the box. Single point calibration allows the end
user to calibrate the load cell in the operating environment to best ensure that the 270W
i
readout is accurate relative to
the international unit of a kilogram. This enables the user to share more accurate data, but is not required for the unit to
repeatedly produce a consistent dose. The 500g calibration weight is not included with the 270W
i
but is available on
www.acaia.co
.
NOTE: 5g minimum for preset mode: The software prevents users from setting a preset below
5g. Due to the speed of the grinder, it is unable to be accurate for weights less than 5g.