www.baratza.com
rev. 10/23/2018
Then pry open the
top
two clips while pulling the gearbox away from the motor (to prevent
clips from locking again). It is easiest to open the clips by placing the screwdriver straight down
and simply rotating the screwdriver:
5.
Once all four clips are free, the gearbox will slide off of the motor. The planet carrier
assembly will still be on the motor mount (as shown below). There will be a thin metal washer
between the gearbox and the planet carrier (shown below). Remove the washer and pull the
planet carrier off the motor mount.
Planet Carrier assembly
1
st
metal washer
(remove and discard)