background image

4

Safety Information

Important Information

Please read the information below very 

carefully.  It contains important tips for 

the use, safety, maintenance and care 

of this appliance.  Please keep these 

operating instructions for future refer-

ence. 

      

Your new 

ESATTO

TM

 is rated for either 

120 VAC or 230 VAC. Please confirm 

the voltage of your 

ESATTO

TM

 on the 

nameplate attached to the bottom of 

the unit. The 120 VAC 

ESATTO

TM

 can be 

used from 100 to 130 VAC and the 230 

VAC 

ESATTO

TM

 can be used from 200 

to 240 VAC. Please insure your sup-

ply voltage range matches the name-

plate voltage on your 

ESATTO

TM

. Only 

clean the 

ESATTO

TM  

housing with a dry 

or slightly damp cloth. Do not use this 

unit for anything other than its intended 

use. If you cannot remedy a malfunc-

tion, please visit the web at www.barat-

za.com for assistance. Repairs are to 

be performed only by authorized ser-

vice centers.  An improperly repaired 

ESATTO

TM

 is a source of risk to the user 

and voids the warranty. Baratza will not 

accept any liability for damage or injury 

if the 

ESATTO

TM

 is used other than for its 

intended purpose or is improperly op-

erated or repaired.  All warranty claims 

will be void.

For Your Safety

Do not operate the 

ESATTO

TM 

with a 

damaged cord or plug, or if the 

ESAT-

TO

TM

 malfunctions. Do not leave your 

ESATTO

TM

 unattended while turned ON. 

Caution

Unplug the 

ESATTO

TM

 

from the electri-

cal outlet before cleaning.  To unplug, 

grasp plug and remove from the outlet 

- never pull on cord. Keep your 

ESAT-

TO

TM

 out of the reach of children. Do not 

immerse the 

ESATTO

TM

, plug or cord in 

water or any other liquid.

Summary of Contents for Esatto













Reviews: