![background image](http://html1.mh-extra.com/html/baratza/encore/encore_how-to_3776573007.webp)
www.baratza.com
rev. 6/5/2019
Pg. 7
The power cord has a
molex connector. The
replacement will only
have one wire installed to
the connector. There are
two other wires which
must be installed.
To remove the cables
from the old connector,
insert a narrow tool into
the exposed slot and
pull gently on the related
cable.
All three snaps engaged
Pull the wires of the new
power cord through the
chassis until the strain
relief snaps into place.
Virtuoso
Encore