Baracoda ToughRunners – User Guide v1.6
- 12 -
Data format
The data format is the following:
Header
General Prefix
Symbology Prefix
Barcode
Symbology Suffix
General Suffix
Baracoda Header
It is a proprietary data encapsulation. It is necessary to activate the Baracoda header in 2 cases:
•
To use the Baracoda keyboard emulation (Kemul) and Terminal.
•
To use the “No data loss” mode.
You can configure Baracoda Header through BaracodaManager software.
The Baracoda header is enabled in default settings
General Prefix / Suffix
You can add a general prefix and/or a suffix to every barcode sent to the host device.
You can configure prefix/suffix through BaracodaManager software or with the Programming Guide.
There is no prefix/suffix in default settings.
Symbology Prefix / Suffix
You can add a prefix and/or a suffix to specific symbology barcode sent to the host device.
Meaning a certain prefix/suffix will be added while reading a specific symbology.
You can configure prefix/suffix through BaracodaManager software.
There is no “symbology prefix/suffix” in default settings.
Beeps and LEDs
You can enable/disable Beeps / LED through the BaracodaManager software or with the Programming Guide.
Power management
Mutliple parameters exist to optimize the battery autonomy (“Sniff period”, “Shutdown timer”, etc…)
Scanner works at 20 dBm (Bluetooth class.1) by default. You can configure at 10dBm (Bluetooth Class.2)
through BaracodaManager software or with the Programming Guide.
Low battery
When the red LED is blinking, this indicates that the battery level is low. Recharge battery immediately.
Data Capture
for Workforce
in Motion