Baracoda ToughRunners – User Guide v1.6
- 5 -
1)
Lanyard
You can choose to attach or not the lanyard to scanner.
2)
Recharging the battery
Recharge the internal battery by using the included AC adapter. The Adapter rating is 5V, 500mA. Place the
scanner front toward the ground, and connect the AC adapter.
When the scanner is charging, the LED is red (solid).
When the scanner is fully charged, the LED is green (solid).
A full recharge (from completely drained batteries) takes approximately 3 hours.
When the original batteries wear out, please contact your Baracoda reseller for replacements.
3)
Switching on the reader
Remember to fully charge the battery before first use.
In order to switch on the scanner, please press the trigger.
The scanner will switch off alone after some period of inactivity. In its standard mode Scanner will switch off
after 20 minutes of inactivity. This value can be modified by the user with the BaracodaManager software.
Data Capture
for Workforce
in Motion
Lanyard attach
2 Power Supply plugs
