Baracoda USB Plug & Scan dongle – User Guide v3.23.7
- 7 -
Data Capture
for Workforce
in Motion
2.4.
2.4.
2.4.
2.4.
Batch
Batch
Batch
Batch
mode
mode
mode
mode
The batch mode can be used with scanners supporting batch mode:
- RoadRunners Evolution (CPU firmware version 1.33 and newer)
- RoadRunners (CPU firmware version 3.20 and newer)
- BaracodaPencil2 (CPU firmware version 1.34 and newer)
This functionality is only available for USB Plug&Scan dongles with firmware version 3.10 and newer (see
(“Print Firmware Version” section for how to get the firmware version).
The upload process consists of temporarily switching the scanner into Real time with “no data loss mode” ON
(all the barcodes in memory will be sent using the no data loss protocol). Then the scanner switches back to
batch mode when all the barcodes are properly sent.
How to
How to
How to
How to use with
use with
use with
use with
RoadRunners
RoadRunners
RoadRunners
RoadRunners
Enable batch mode
When this mode is set, all the scanners (supporting the functionality) working with the dongle are in batch
mode: all scanned data is stored in the flash memory.
The stored barcodes can be discharged by scanning the following barcode:
Upload batch data
(for RoadRunners)
