BCM2604 User Guide
6
Other functions
6.1
Power management
You can configure your scanner to work at 20 dBm (default setting) or 10 dBm through BaracodaManager.
Due to local law, you may not use 20 dBm in some countries.
Please refer to your local law before using your scanner.
6.2
Sniff period
The higher the Sniff period is, the higher is the latency and the smaller is power consumption.
Default value is 150ms.
6.3
Low battery
A triple green blinking LED indicates that the battery level is low. Recharge batteries. When you listen a triple
bip, you can no longer scan barcodes. The reader shut down.
When the LED is continuously red, you can no longer scan barcodes.
•
How to recharge the battery
Plug the cradle connector into the AC wall adapter, then place the 2604 in the cradle.
When the scanner is inserted into the cradle and charging, the LED is red (solid).
When the scanner is fully charged, the LED will become a solid green.
A full recharge (from completely drained batteries) takes approximately 5 hours.
When the original batteries wear out, please contact your Baracoda reseller for replacements.
6.4
Security
The Bluetooth connection is secured with a PIN code authentication.
You can configure security (enable/disable/change PIN code) through BaracodaManager.
The Security is enable in default settings: default PIN code is 0000.
© Baracoda 2003
Page 7/8
