bar SC200BS, Manual

Page: 18 / 27

Daily maintance cycle
each time
the first
month or
every
3month or
every
6month or
every 1year
Item : based on the runing target
each time month or
20h
3month or
50h
6month or
100h
or 300h
check the level ○
change ○ ○
check ○
clean ○
S di t ti l l
ENG oil
Air cleaner filter
month or the runing hour to maintain
Sedimentation glass clean ○
check - adjust ○
replace ○
Valve clearance Check - adjust ○
Combustion chamber clean every 500h
Case and filter clean ○
Spark plug
Fuel hose check ○ every two years ( if necessar , please replace )
8.Maintenance
Change oil(when warm the unit, remove the oil to make sure
that the drain the oil completely)
8.1 Changing the oil: Make sure you warm up the unit for a
short period of time to ensure all oil residues will drain.
8.1.1 Make sure the unit is off of the ground to leave enough
space to drain the oil into a container. Remove the oil plug,
oil bolt and the seal.
8.1.2 Make sure the oil is drained completely. Then tighten
the bolt and replace the seal. To purchase a new seal please
contact Industrial.
8.1.3 Fill the unit with oil into the crankcase to the
recommended level on the oil dipstick plug. Once you have
reached the recommended level tighten the oil plug.
15