ATTENTION: When using the Triad 3 in 1 and you hear
unfamiliar noises coming from the unit it is important to err
on the side of caution and contact Industrial immediately.
8.7 Compressor maintenance
8.7.1 For any air compressor oil changes please refer to the
engine oil change.
Do not mix or use the same model lubricating oil.
8.7.2 Compressor oil change should reference engine oil
change step 8.1. Use HS-13# compressor oil in the winter.
Use HS-19# compressor oil in the summer. Open the drain
oil bolt which is located under the main fuel tank. After the oil
has fully drained tighten the bolt and then add oil.
8.7.3 Inspect the oil level before use. Do not exceed or add
less than the red line level.
8.7.4 Before each use of the air compressor drain the air
compressor tanks of air and condensed water build up. The
compressor petcocks are located at the bottom of the tanks.
8.7.5 Make sure you clean your air filter every month. If in
poor working conditions you should inspect it every two
weeks. Cleaning or changing the air filter should be based
on oil contamination or block condition.
Summary of Contents for SC200BS
Page 1: ...WELDING GENERATOR SC200BS ...
Page 7: ......
