PRESSURE CLEANER
OPERATOR’S MANUAL
UNDERSTANDING EQUIPMENT
18
120 BAR5027CG-HEP
1.
Spray gun/Lance assembly
- Controls the application of water onto cleaning surface with trigger device.
Includes trigger lock. Allows you to switch between various spray tips.
2.
Fuel tank
- Always leave room for fuel expansion. Do not fill while machine is running or hot.
3.
Air filter
- Protects the engine by filtering dust and debris out of intake air.
4.
Gearbox
- Houses reduction gears to reduce shaft speed for pumps.
5.
Battery
- For electric start machines.
6.
Vibration plate
- isolates motor pump group on anti-vibration mounts to limit frame vibrations.
7.
Pump
- Develops high pressure. Connect the supply hose to the water tank or pump inlet and connect the
high pressure hose to the outlet.
8.
Unloader
- Opens to bypass in an over-pressured system. Pressure is pre-set at the factory.
9.
Nozzles
- 0°, 15°, 40° and detergent: for various cleaning applications.
10.
Detergent siphoning hose
- Used to draw detergent into a low pressure stream. (OPTIONAL EXTRA)
11.
Muffler/Exhaust
- Reduces noise of the engine and expels heat (CAUTION HOT).
12.
High pressure hose
- Designed to withstand the pressure created by the pump. Carries water flow to gun.
13.
Throttle lever
- Adjusts engine speed, set to maximum speed once started.
14.
Emergency stop
- Immediately shuts off engine when pressed. To release rotate clockwise.
15.
Choke
- Prepares a cold engine for starting.
16.
Ignition switch
-
Set switch to “On”
.
“Start” for electric starter engageme
nt. Turn to
“
Off
”
to shutdown engine.
[NOTE: See petrol engine manual also provided for detailed operation/maintenance & warranty
information.]