BAQ alphaDUR mini, Manual

Page: 35 / 50

SYSTEM SETTINGS
10.4.3 Key MAT
In the menu item System / Configuration / Key MAT , the function of the key
MAT in the measurement window is set.
10.4.4 Query whether the values should be saved in a series
Under the menu item System / Configuration / Save series query you can
determine if you want to be queried whether the data should be saved when
you close the measuring or statistics (see 6.1 Statistics) window. Select 'Off' to
turn off the query and 'On' to turn it on.
10.4.5 Query whether the values should be printed
Under the menu item System / Configuration / Print values query you can
determine if you want to be queried whether the data should be printed when
you close the statistics window (see 6.1 Statistics). This happens, if the
statistics configuration is switched on.
10.4.6 Tensile strength unit
Under the menu item System / Configuration / Tensile strength unit it can be
selected if the unit of tensile strength should be displayed as Mpa (megapascal)
or N/mm2 (Newton per square millimeter).
Select:
Open dialog If the new material should be selected in a dialog.
Next material If the material should be set automatically to the
next valid material.
35
Select:
Open dialog If the new hardness scale should be selected in a
dialog.
Next scale If the hardness scale should be set automatically to the
next valid scale.