background image

2

1-10

"4" represents the total number of segments of
the pattern. If you click, you can select the total
number of segments.
"3" represents the segment No. of the pattern.
As shown in the figure, there are 4 patterns in the
3rd pattern. The figure is the data of the 3rd
segment.

3

1-99

1

"1" represents the stitch numbers of the pattern.
As shown in the figure, the number of stitches in
the 3rd segment of the 3rd pattern is 1.

4

1-9

5

"1" represents the repeat times of the pattern. As
shown in the figure, the repeat times for the 3rd
segment of the 3rd pattern is 1.

5

0-5.0

4.8

"1.0" represents the stitches length of this pattern.
As shown in the figure, the stitches length of the
3rd segment of the 3rd pattern is 1.0 mm.

1.3 Constant Stitch Sewing Interface Description

No.

Items

Range

Default

Description

1

1-15

4

"4" represents the number of constant stitch
sewing mode. As shown in the figure, it
represents 4th constant stitch sewing mode.

2

1-4

"4" represents the total number of segments of
the constant stitch sewing mode. If clicked, the
total number of segments can be selected.
"1" represents the segment No. of constant stitch
sewing.
As shown in the figure, it represents the data of
the 1st segment of the 4 segments.

3

0-99

12

"1" represents the number of stitches in this
segment. As shown in the figure, the number of
stitches in the 1st segment of the 4 segments is 1.

4

Summary of Contents for GT-288C-D4















Reviews: