7
* Do not pull brake lever when brake caliper is removed so
as to prevent jamming of brake block.
If brake block is jammed, pry it with screwdriver and push
piston back into caliper.
Brake Block Replacement:
Brake block must be replaced when it is worn to the limit of
use.
* It is not necessary to remove brake oil pipe when
replacing brake block.
* Brake block must be replaced as a set.
Remove two pieces of brake block pins by means of a
hexagon wrench.
Effect mounting in an order reversed to that of dismounting.
*After effecting, first tighten the brake caliper and put its
hole right to the hole of brake caliper and then put the brake
block pin in and tighten it.
Brake Disc Inspection:
Inspect brake disc thickness.
Limit of use: 3.0mm
Inspect brake disc angularity.
Limit of use: 0.3mm
2. Rear Brake
brake block
brake caliper
brake block pin
brake block pin
press brake block
rear brake lever
