2
2
IV. FRONT FORK SERVICE
Dismounting
Remove motorcycle body covering parts.
Remove nut and blot from handlebar;
Remove handlebar.
Remove steering stem setting nut.
Remove upper bearing cup, upper bearing top and bearing set.
Remove front axle nut;
Remove front wheel.
Remove front shock absorber, front fender (the mounting
screws is inside the fender) etc.
Remove steering stem from head tube.
The removing of the bottom bearing cup, bearing top and
bearing set is the same as the removing of the upper series.
Do not damage steering stem when removing bearing
cup and bearing top.
Clean opening parts of motorcycle body covering parts
with cloth.
Inspection
Inspect if there is slot or pit in bearing cup and bearing top. If
there is, effect replacement.
front fender
screws
shock absorber
upper bearing
cup,bearing top
and ball set
handlebar
set nut
bolt
nut
head tube
bottom bearing
cup,bearing top
and ball set
head tube
body covering
parts
upper bearing top
ball set
ball set
bottom bearing cup
bottom bearing top
upper bearing cup
