9
Inspect wheel rim, remove rust stains and rubber chips.
Deformation and fissures are causes of air leakage. Do not use wheel rims in the following
cases:
Bruise of wheel rim face contacting tire bead ring exceeds 0.5mm in depth and 1.0mm in
width.
Tire Inspection:
Inspect if there is fissure or iron nail in the tire.
In one of the following conditions, tires must be replaced instead of repair.
Puncture of tire by a foreigner matter 6mm in diameter or tire fissure.
Layered tire.
Chunking of tread
Damaged tire bead
Broken tire bead or other tire bead damages
Broken tire cord
Damage due to forced dismounting
Fissure extending to frame
Abnormal inner lining
Tire groove wear: front wheel
<
0.8mm,
rear wheel
<
0.8mm.
Punctured or otherwise damaged tire flank
Inspect tire pressure by means of a tire pressure gauge
* Tire pressure should be inspected when the motorcycle is in a cold state.
Specified pressure Unit: kPa
Front wheel
250
Rear wheel
250
Tire Specifications:
Front wheel 120/70 -56J
Rear wheel 3.50-10 -51J
Inspect if front wheel nut is loose.
Inspect if rear wheel nut is loose.
If loose, tighten them to specified torques.
front axle nut
