15
15
(4) Daily maintenance should be done before or after using the truck. Anytime you
(4) Daily maintenance should be done before or after using the truck. Anytime you
find that the truck is not functioning normally, operation of the truck should be halted and
find that the truck is not functioning normally, operation of the truck should be halted and
check or repair at once.
check or repair at once.
(5) When the distance between the gravity center of loads and the fork arms is
(5) When the distance between the gravity center of loads and the fork arms is
500mm, the max.
500mm, the max. capacity is the rated capacity
capacity is the rated capacity. When
. When the distance exceeds 500mm, the
the distance exceeds 500mm, the
capacity shall be reduced according to the load chart. Overloading is stri
capacity shall be reduced according to the load chart. Overloading is strictly prohibited.
ctly prohibited.
(6) Operate your forklift truck on a hard ground. Operate on other ground, the lift
(6) Operate your forklift truck on a hard ground. Operate on other ground, the lift
capacity and travel speed must be decreased. Wipe off the oil
capacity and travel speed must be decreased. Wipe off the oil and grease from the floor.
and grease from the floor.
(7) If the
(7) If the forklift truck is equipped with attachment, its usage sphere will be
forklift truck is equipped with attachment, its usage sphere will be wider
wider, but
, but
its allowable load and stability is reduced. The attachment and special device is
its allowable load and stability is reduced. The attachment and special device is not to be
not to be
diverted to any other
diverted to any other purpose. It’s very dangerous to rebuild the
purpose. It’s very dangerous to rebuild the attachment. Please read
attachment. Please read
the additional instruction we supplied and operate the truck f
the additional instruction we supplied and operate the truck following it strictly
ollowing it strictly..
(8) Users select
(8) Users select
“Lengthening fork” in order to carry widening loads. Pay much
“Lengthening fork” in order to carry widening loads. Pay much
attention not to overload and observe the allowable load and the capacity chart stuck on
attention not to overload and observe the allowable load and the capacity chart stuck on
the truck. Careful driving should be taken when traveling
the truck. Careful driving should be taken when traveling and turning.
and turning.
(9) The unloaded forklift truck with attachment should be operated as a
(9) The unloaded forklift truck with attachment should be operated as a loaded truck.
loaded truck.
(10) Connect the power and turn on the key switch, select the position of direction
(10) Connect the power and turn on the key switch, select the position of direction
switch, check the truck for normal operation by turning steering wheel, depress the
switch, check the truck for normal operation by turning steering wheel, depress the
accelerator pedal softly to
accelerator pedal softly to keep proper acceleration.
keep proper acceleration.
(11) During operation, pay attention to the performance and condition of the system
(11) During operation, pay attention to the performance and condition of the system
of machinery, hydraulic, electric etc.
of machinery, hydraulic, electric etc.
(12) When operate one lever, pay attention not to shift another lever. Don’t operate
(12) When operate one lever, pay attention not to shift another lever. Don’t operate
the lever at any position out of the driver
the lever at any position out of the driver
’s
’s
seat.
seat.
(13) The shift distance of control valve lever can control the speed of the lifting or
(13) The shift distance of control valve lever can control the speed of the lifting or
descending of the goods. When the goods are lifted or descended, the initial speed
descending of the goods. When the goods are lifted or descended, the initial speed
shouldn’t be too fast in
shouldn’t be too fast in either case.
either case.
(14) When tilting the mast forward or backward to the limit or lifting the fork to the
(14) When tilting the mast forward or backward to the limit or lifting the fork to the
maximum height, return the directional lever to neutral.
maximum height, return the directional lever to neutral.
(15) The starting, turning, driving, braking and stopping of the truck should be done
(15) The starting, turning, driving, braking and stopping of the truck should be done
smoothly
smoothly. When turning on the
. When turning on the humid or slippery road, the truck
humid or slippery road, the truck should be decelerated.
should be decelerated.
(16) Because the forklift truck turns by the rear wheels, the end counterweight may
(16) Because the forklift truck turns by the rear wheels, the end counterweight may
swing widely when turning. Use care in
swing widely when turning. Use care in narrow aisles and other workplaces.
narrow aisles and other workplaces.
(17) Operate the forklift truck
(17) Operate the forklift truck
smoothly, don’t jerk
smoothly, don’t jerk
the steering wheel. Avoid sudden
the steering wheel. Avoid sudden
stop, acceleration, stop or turn.
stop, acceleration, stop or turn. In the case of
In the case of improper operation, the truck will
improper operation, the truck will turn over.
turn over.
In case of this, the driver must keep calm, don’t jump off the truck. The driver must hold
In case of this, the driver must keep calm, don’t jump off the truck. The driver must hold
https://www.besttruckmanuals.com/
