BAOJIE BJ-318, User Manual, Page: 16 / 28

12
Group call to specific stations
For example, the group contains stations with ANI codes: 12345, 12789, 23888.
You can only make a call to stations whose ANI code begins with 12.
To do this, press the [PTT] key and type [1] [2] [*] [*] [*] on the microphone keypad.
In this case, the call will not sound in the station with ANI-code starting with 23. Note.
An asterisk [*] can replace any code digits, or even all.
Remote control of the unit
Note! You must first program the control codes using a computer (CHIRP) .
In the program, the tab "DTMF Groups" Factory recommended settings.
The length of the control codes can be from 1 to 7 characters.
The length of the control codes can be from 3 to 5 characters.
Reset, Transmit Inhibit, Complete Inhibit and Monitor codes must start with "#". The
master code must be the same as the identification code.
Figure 3: Example of remote-control values
Native ID Code
Individual station ID-code. It is also ANI-code (Automatic number identification).