BAOJIE BJ-318, User Manual, Page: 10 / 28

6
3. Save the selection by pressing the [MENU] button. When you set the shift, the "+" or "-"
indicator will appear on the screen, respectively. The shift value is set in menu 15
OFFSET.
Changing the step of the frequency transition "STEP"
Note! The function works only in frequency mode.
1. Select the required receiver, press the [MENU] button and then the [STEP] button.
2. Use the [
▼
] [
▲
] buttons to select the desired value:
2.5kHz / 5kHz / 6.5kHz / 10kHz / 12.5kHz / 25kHz / 50kHz.
3. Save the selection by pressing the [MENU] button.
Fast reverse of the transmit and receive frequencies "REV"
Note! Reverse turns on even with the same transmit and receive frequencies.
1. Select the required receiver, press the [MENU] button and then the [REV] button.
2. When the reverse mode is turned on, the "R" icon will appear on the screen.
3. To disable reverse, press the [MENU] button again and then the [REV] button.
Switching on the FM radio "FM"
1. Press the [MENU] button then the [FM] button.
2. Press one of the [
▼
] [
▲
] buttons, the frequency scrolling will start, which will stop
when the first FM station is found.
3. To retune to the next FM station in frequency, press [
▼
] [
▲
] again.
FM station reception stops if a signal appears on one of the main receivers. FM station
reception resumes a few seconds after the signal is lost on the main receivers.
Switching off the reception of an FM station is done by pressing the [EXIT] button.
A specific default FM station can be set using software to program it.
Setting the threshold for opening the squelch "SQL"
Note! The function works only in frequency mode.
1. Select the required receiver, press the [MENU] button and then the [SQL] button.
2. Use the [
▼
] [
▲
] buttons to select the desired value from SQ 0 to SQ 9
The lower the value, the more sensitive the transceiver. The squelch is completely disabled,
with a value of SQ 0.
Scanning "SCAN"
In channel mode:
1. Press the [MENU] button then the [SCN] button. The channel search will start in the
direction of increasing the channel number.