VISIT BAOFENGTECH.COM AND MIKLOR.COM FOR DOWNLOADS AND HELP
19
master ID means the function only works by signal code and master ID both confirm. No control
by master ID coding format: signal code + #(patch code} + information code. Control by master
ID coding format: #(patch code)+ master ID code+#(patch code)+information code
DTMF Transmit by Call Key Setting:
1.
Select DTMF signal, press [F] Key + [2] Key + [O] Key + [F] Key + UP(DOWN) select DTMF
[F] Key save setting.
2.
Select signal Information code. Press [F] Key + [2] Key + [4] Key + [F] Key + UP(DOWN)
select decode signal information code group (1-15) + [F] Key save the setting.(Can use PC
software set DTMF code}.
3.
Press [Call] Key transmit selected DTMF code group at standby.
2TONE Transmit by Call Key Setting
1.
Press [MENU] Key select 20 OPTSIG, press [F] Key select 2TONE function.
2.
Press [MENU] Key select 24 S-INFO, press [F] Key select pre-code signal group (1-16).
(Can use PC software setting 2TONE)
3.
Corresponding function will turn on when receive 2TONE signal is same as pre-set
2TONE code
4.
Press [Call] Key to send 2TONE group code at standby.
Summary of Contents for UV-2501
Page 1: ......
Page 5: ...iii ...
Page 6: ......
Page 36: ...30 VISIT BAOFENGTECH COM AND MIKLOR COM FOR DOWNLOADS AND HELP UV 2501 UV 5001 ...
