10
VISIT BAOFENGTECH.COM AND MIKLOR.COM FOR DOWNLOADS AND HELP
UV-2501 / UV-5001
are BLUE, ORANGE and PURPLE.
35.
[F Key] + [3] + [5]
: TX-LED - transmit backlight setting. OFF: no backlight. Color options
are BLUE, ORANGE and PURPLE.
36.
[F Key] + [3] + [6]
: MEM-CH - saves the selected channel.
37.
[F Key} + [3] + [7]
: DEL-CH - deletes the channel selected.
38.
[F Key] + [3] + [8]
: SFT-D - Frequency difference direction setting. OFF: no frequency
difference. (
+)
: Transmit offset amount will higher than the receive frequency. (
-
)
:
Transmit offset amount will lower than the receive frequency.
39.
[F Key] + [3] + [9]
: OFFSET - difference between the transmit and receive frequency.
(00.000 - 69.990 MHz)
40.
[F Key] + [4] + [0]
: ANI - radio ID code. Code only can set by PC software.
41.
[F Key] + [4] + [1]
: ANI-L - ID code length. Length = 3, 4, 5.
42.
[F Key] + [4] + [2]
: REP-S - repeater activate setting. Pressing CALL will send a
predetermined tone. Options are 1000 Hz, 1450 Hz, 1750 Hz, 2100 Hz.
43.
[F Key] + [4] + [3]
: REP-M - repeater forwarding mode setting.
OFF
: close function.
CARRI
: forwarding after receive carrier.
CTDCS
: forwarding after receive correct
CTDCS.
TONE
: forwarding after receive correct mono audio.
DTMF
: forwarding
after receive assigned DTMF code.
44.
[F Key] + [4] + [4]
: TDR-AB - TDR return time. Delay time before returning to the
primary channel after secondary signal is clear.
Summary of Contents for UV-2501
Page 1: ......
Page 5: ...iii ...
Page 6: ......
Page 36: ...30 VISIT BAOFENGTECH COM AND MIKLOR COM FOR DOWNLOADS AND HELP UV 2501 UV 5001 ...
