Baofeng UV-2501, User Manual

Page: 24 / 36

18 VISIT BAOFENGTECH.COM AND MIKLOR.COM FOR DOWNLOADS AND HELP
UV-2501 / UV-5001
transmit function, only the receiver (LCD will display remote stun information). Only after
receiving the ON code will the transmit function return. This function’s settings are controlled by
the master ID, and not the receiving station. (remote stun code is set by PC software)
Remote Kill
When receive DTMF signal Is same as pre-set remote kill code, receiver will turn off all functions,
and LCD will display remote kill information. Only after receiving the ON code will the radio’s
function return. This function’s settings are controlled by the master ID, and not the receiving
station. (remote kill code is set by PC software)
Turn on function
When receive DTMF signal matches the pre-set turn on code, the remote stun or remote kill will
be cancelled. This function’s settings are controlled by the master ID, and not the receiving
station. (remote kill code is set by PC software)
Alarm function
When receive DTMF signal matched the pre-set alarm code, the receiver’s alarm function will be
turned on. Alarm mode and alarm channel are set by PC software. This function is controlled by
the master ID and not the receiving station. (Alarm code is set by PC software). Signal control by