The battery runs down quickly.
The batery life has come to an end, replace the
batery tith a net one.
The batery is fully charged, make sure the batery is
made in full.
The receiaing indicator LED lights but do not hear
the speaker.
Make sure the aolume setng is too lot.
Make sure the undertones "CTCSS" or code "DCS"
are the same as those programmed in the
transceiaer of the other members of your group.
When transmitng, the other members of his group
do not receiae the communicaton.
Make sure the undertones "CTCSS" or code "DCS"
programmed in your transceiaer are the same as
those programmed in the transceiaer of the other
members of your group.
Your partner or you, are too far.
You or your partner are in a bad area of RF signal
propagaton.
In "standby" mode, the transceiaer transmits
tithout pressing the "PTT".
Check the leael adjustment functon "VOX" is not set
too sensitae.
Receiae communicatons from other user groups
thile communicatng tith your group.
Change frequency or channel.
Change the undertones "CTCSS" or code "DCS" in
your group.
Communicaton tith other members of your group
is poor or lot quality.
You or your partner is too far atay or in an area of
poor radio signal propagaton, such as inside a
tunnel, inside an underground car park, in a
mountainous area, including large metal structures,
etc..
Once these checks, if you satll have problems with the transceiver, check with your distributor, dealer or
service center.
