Banner T30RW, Instruction Manual

Page: 32 / 43

June 23, 2023
T30RW R-GAGE Washdown Radar Sensor Instruction Manual
32
•
•
T30RW-1515-KxQ-NPT 1.5 Models
2X
R30 [1.18]
T30RW Beam Patterns
The beam pattern of the radar sensor is dependent on the radar cross section (RCS) of the target.
The beam pattern graphs are guides for representative object detection capabilities based on different-sized radar cross-
sections and corresponding example real-world targets. Use the following charts as a starting point in the application setup.
Note that applications vary.
Use the Beam Width versus Distance chart to understand where corresponding objects can be detected. Adjusting
the signal strength threshold also affects the beam pattern when the target is constant.
Use the Beam Width versus Degrees chart to help determine how much the target can tilt from 90 degrees while still
maintaining detection.
Unless otherwise specified, the following beam patterns are shown with Signal Strength Threshold = 1.
© Banner Engineering Corp.