Specifications
Radio Range
900 MHz, 1 Watt: Up to 3.2 km (2 miles) with line of sight (internal antenna)
2.4 GHz, 65 mW: Up to 1000 m (3280 ft) with line of sight (internal antenna)
Antenna Minimum Separation Distance
900 MHz, 150 mW and 250 mW: 2 m (6 ft)
900 MHz, 1 Watt: 4.57 m (15 ft)
2.4 GHz, 65 mW: 0.3 m (1 ft)
Radio Transmit Power
900 MHz, 1 Watt: 30 dBm (1 W) conducted (up to 36 dBm EIRP)
2.4 GHz, 65 mW: 18 dBm (65 mW) conducted, less than or equal to 20 dBm (100 mW)
EIRP
Radio Packet Size (SRM-H and HL)
1500 bytes, maximum
900 MHz Compliance
Radio module is indicated by the product label marking
Contains FCC ID: UE3RM7023: FCC Part 15, Subpart C, 15.247
Contains IC: 7044A-RM7023
2.4 GHz Compliance (SX243 Radio Module)
Radio module is indicated by the product label marking
Contains FCC ID: UE3SX243: FCC Part 15, Subpart C, 15.247
Radio Equipment Directive (RED) 2014/53/EU
Contains IC: 7044A-SX243
ANATEL: 03737-22-04042 Este equipamento não tem direito à proteção contra
interferência prejudicial e não pode causar interferência em sistemas devidamente
autorizados. Para maiores informações, consulte o site da ANATEL
Spread Spectrum Technology
FHSS (Frequency Hopping Spread Spectrum)
Communication Hardware
Interface: 2-wire half-duplex RS-485
Baud rates: 9600, 19.2k (default)
Data format: 8 data bits, 1 stop bit, no parity (default)
Radio Data Transfer Rate
900 MHz: 300 kbps
2.4 GHz: 250 kbps
Supply Voltage
10 V DC to 30 V DC (Outside the USA: 12 V DC to 24 V DC, ± 10%)
1
Average Current for 900 MHz Radios (1500 byte packets at 50 ms intervals)
Master Mode: 0.12 A at 12 V; 0.06 A at 24 V
Slave Mode: 0.03 A at 12 V; 0.017 A at 24 V
Average Current for 2.4 GHz Radios (1500 byte packets at 50 ms intervals
Master Mode: 0.035 A at 12 V; 0.02 A at 24 V
Slave Mode: 0.022 A at 12 V; 0.014 A at 24 V
Interface
Two bi-color LED indicators
One button (under the small round cover)
Construction
TBD
Shock and Vibration
All models meet IEC 60068-2-6 and IEC 60068-2-27 testing criteria
Shock: 30G 11 ms duration, half sine wave per IEC 60068-2-27
Vibration: 10 Hz to 55 Hz, 0.5 mm peak-to-peak amplitude per IEC 60068-2-6
Operating Conditions
–40 °C to +85 °C (–40 °F to +185 °F)
95% maximum relative humidity (non-condensing)
Radiated Immunity: 10 V/m (EN 61000-4-3)
Operating the devices at the maximum operating conditions for extended periods can
shorten the life of the device.
Environmental Ratings
IP65
For installation and waterproofing instructions, go to
and
search for the complete instruction manual
Certifications
Banner Engineering Europe Park
Lane, Culliganlaan 2F bus 3, 1831
Diegem, BELGIUM
(CE/UKCA approval only
applies to 2.4 GHz
models)
Turck Banner LTD Blenheim
House, Blenheim Court, Wickford,
Essex SS11 8YT, Great Britain
1
For European applications, power this device from a Limited Power Source as defined in EN 60950-1.
Sure Cross
®
R70SR Serial Data Radio
P/N 224673 Rev. B
www.bannerengineering.com - Tel: + 1 888 373 6767
5
