Banner Q5Z, Quick Start Manual

Page: 2 / 6

June 23, 2023 page 2
Q5Z Global Laser Measurement Sensor with IO-Link Quick Start Guide
Class 2 Red Laser models: Reference IEC 60825­1:2014
FDA (CDRH) warning label (Class 2)
LASER LIGHT
DO NOT STARE INTO BEAM
CLASS 2 LASER PRODUCT
IEC 60825-1:2014. Wavelength
640-670nm; 1.0mW max. Complies with
21 CFR 1040.10 and 1040.11 except for
conformance with IEC 60825-1: 2014
as described in Laser Notice
No. 56, dated May 8, 2019.
Output: < 1.0 mW
Laser wavelength: 640 to 670 nm
Pulse Duration for <5 m Models: 20 µs to 2 ms
Pulse Duration for ≥ 5 m Models: 3 µs
Features
The following shows the simplified user interface of the Q5Z .
Q5Z Features
1
2
3
Use the sensor button (TEACH) to program the sensor.
Press and hold for longer than 2 seconds to start the pre-
configured TEACH mode.
Top View
Installation
Sensor Orientation for the Triangulation Models
Optimize detection reliability and minimum object separation performance with correct sensor­to­target orientation.
To ensure reliable detection, orient the sensor as shown in relation to the target to be detected.
Optimal Orientation of Target to Sensor
See the following figures for examples of correct and incorrect sensor-to-target orientation as certain placements may pose problems for
sensing some targets. The Q5Z can be used in the less preferred orientation and at steep angles of incidence and still provide reliable detec­
tion performance due to its high excess gain. For the minimum object separation distance required for each case, refer to "Performance
Curves " on page 5 .
Chanel 1 output indicator (amber) 1.
Chanel 2 output indicator (amber) 2.
Button 3.
© Banner Engineering Corp.