Class 2 Red Laser models with maximum range > 2000 mm: Reference IEC 60825-1:2014
Figure 5. FDA (CDRH) warning label (Class 2)
LASER LIGHT
DO NOT STARE INTO BEAM
CLASS 2 LASER PRODUCT
IEC 60825-1:2014. Wavelength
640-670nm; 1.0mW max. Complies with
21 CFR 1040.10 and 1040.11 except for
conformance with IEC 60825-1: 2014
as described in Laser Notice
No. 56, dated May 8, 2019.
Output:
< 1.0 mW
Laser wavelength:
640 to 670 nm
Pulse Duration for <5 m Models:
20 µs to 2 ms
Pulse Duration for ≥ 5 m Models:
3 µs
Installation
Sensor Orientation for the Triangulation Models
Optimize detection reliability and minimum object separation performance with correct sensor-to-target orientation.
To ensure reliable detection, orient the sensor as shown in relation to the target to be detected.
Figure 6. Optimal Orientation of Target to Sensor
See the following figures for examples of correct and incorrect sensor-to-target orientation as certain placements may pose
problems for sensing some targets. The Q5X can be used in the less preferred orientation and at steep angles of incidence and still
provide reliable detection performance due to its high excess gain. For the minimum object separation distance required for each
case, refer to .
Figure 7. Orientation by a wall
Incorrect
Correct
CC
Figure 8. Orientation for a moving object
CC
Incorrect
Correct
Figure 9. Orientation for a height difference
CC
Incorrect
Correct
Figure 10. Orientation for a color or luster difference
Horizontal
Orientation
Vertical
Orientation
(Optimal)
CC
Figure 11. Orientation for highly reflective target
1
Reflective
Surface
(optional)
Mount the Device
1. If a bracket is needed, mount the device onto the bracket.
2. Mount the device (or the device and the bracket) to the machine or equipment at the desired location. Do not tighten the
mounting screws at this time.
1
Applying tilt to sensor may improve performance on reflective targets. The direction and magnitude of the tilt depends on the application, but a 15° tilt is often sufficient.
Q5X Laser Measurement Sensor with Dual Discrete Outputs and IO-Link
P/N 208795 Rev. G
www.bannerengineering.com - Tel: + 1 888 373 6767
3
