Wiring Diagram—Threaded Barrel Models
3
1
2
4
5
10-30V dc
Remote
Teach
Load
Load
+
–
Note:
Open lead wires must be connected to a terminal block.
1
4
5
3
2
Key
1 = Brown
2 = White
3 = Blue
4 = Black
5 = Gray
Note:
The input wire function is user-selectable; see the Instruction Manual for details. The default for the input
wire function is off (disabled).
Wiring Diagram—Flush Mount Models
NPN Models
Input Wire
10-30V dc
Load
PNP Models
Load
10–30 V dc
Input Wire
1
4
3
2
Key
1 = Brown
2 = White
3 = Blue
4 = Black
Note:
Open lead wires must be connected to a terminal block.
Note:
The input wire function is user-selectable; see the Instruction Manual for details. The default for the input
wire function is off (disabled).
Cleaning and Maintenance
Clean the sensor when soiled and use with care.
Handle the sensor with care during installation and operation. Sensor windows soiled by fingerprints, dust, water, oil, etc. may create
stray light that may degrade the peak performance of the sensor. Blow the window clear using filtered, compressed air, then clean
as necessary using only water and a lint-free cloth.
Sensor Programming
Program the sensor using the buttons on the sensor or the remote input (limited programming options).
In addition to programming the sensor, use the remote input to disable the buttons for security, preventing unauthorized or
accidental programming changes. See the Instruction Manual, p/n 181483 for more information.
Setup Mode
Access Setup mode and the sensor menu from Run mode by pressing and holding
MODE
for longer than 2 seconds. Use
and
to navigate through the menu. Press
SELECT
to select a menu option and access the submenus. Use
and
to navigate
through the submenus. Press
SELECT
to select a submenu option and return to the top menu, or press and hold
SELECT
for longer
than 2 seconds to select a submenu option and return immediately to Run mode.
To exit Setup mode and return to Run mode, navigate to
and press
SELECT
.
Q4X Stainless Steel Laser Sensor
4
www.bannerengineering.com - Tel: + 1 888 373 6767
P/N 181484 Rev. N
