Verify the M-GAGE Operation
Monitor the M-GAGE's performance using the DXM's Registers view.
Figure 10. Front view of a DXM700-Bx Controller
To verify the M-GAGE operation using the DXM's Registers view, follow these steps.
1. On the DXM: From the
Main
menu, select
Registers
.
2. View the
MG_1 Data
register.
This register displays the derived value of the M-GAGE sensor. The threshold for the application is 190. If the value in
MG_1
Data
is greater than 190, the output is active.
M-GAGE Installation Instruction Manual
©
Banner Engineering Corp. All rights reserved
