Installation Guide
Advanced sensor with dual digital displays for use with plastic and glass fiber optic assemblies.
and search 161999.
Overview
Figure 1. DF-G1 Model Features
1
Output LED
2
LO/DO Switch
3
RUN/PRG/ADJ Mode Switch
4
Lever Action Fiber Clamp
5
Red Signal Level
6
Green Threshold
7
+/SET/- Rocker Button
WARNING: Not To Be Used for Personnel Protection
Never use this device as a sensing device for personnel protection. Doing so could lead to
serious injury or death. This device does not include the self-checking redundant circuitry necessary
to allow its use in personnel safety applications. A sensor failure or malfunction can cause either an
energized or de-energized sensor output condition.
Models
Model
Outputs
Connector
1
DF-G1-NS-2M
Single NPN
2 m (6.5 ft) cable, 4-wire
DF-G1-PS-2M
Single PNP
DF-G1-KS-2M
Dual outputs, 1 push-pull IO-Link and 1
PNP (complementary outputs)
DF-G1-NS-Q5
Single NPN
150 mm (6 in) PVC pigtail, M12 Euro QD connector,
4-pin
DF-G1-PS-Q5
Single PNP
DF-G1-KS-Q5
Dual outputs, 1 push-pull IO-Link and 1
PNP (complementary outputs)
DF-G1-NS-Q7
Single NPN
Integral M8 Pico QD connector, 4-pin
DF-G1-PS-Q7
Single PNP
DF-G1-KS-Q7
Dual outputs, 1 push-pull IO-Link and 1
PNP (complementary outputs)
1 Connector options:
•
A model with a QD connector requires a mating cordset .
•
For 9 m cable, change the suffix 2M to 9M in the 2 m model number (example, DF-G1-NS-9M).
•
For 150 mm (6 in) PVC pigtail, M8 Pico QD connector, 4-pin change the suffix 2M to Q3 in the 2 m model number (example, DF-G1-NS-Q3).
DF-G1 Expert
™
Dual Display Fiber Amplifier
Original Document
161275 Rev. D
9 September 2015
161275
