10
97282 v.3.0
1.
Disconnect the battery ground
cables from each battery (if so
equipped). Secure the cables so that
they do not come in contact with the
battery posts during the installation.
2.
Remove the engine cover for:
a.
The Ram 1500, by first
removing the oil filler cap.
Then, lift up at the front to
release the rubber socket
mounts and pull forward to
release from rear mounts.
Reinstall oil filler cap.
See
Figure 1
.
b.
The Jeep Grand Cherokee,
by lifting up at each corner
to release the rubber
socket mounts.
See
Figure 2
.
If installing in a Jeep
Grand Cherokee, skip steps 3 and 4
and proceed to step 5.
Section 1
INSTALLATION OF WIRING HARNESS, CONNECTIONS & DERRINGER
TUNER
Figure 2
Figure 1
Ram 1500
Grand Cherokee
