Pic. 1
Pic. 2
Aircraft status indicator
Low battery RTH
Bugs 7 User Manual
Home Point
GPS
Description
If a strong GPS signal (satellites over 7) was acquired before takeoff, the Home Point
is the location from which the aircraft launched. The GPS signal strength is indicated
by the GPS icon( ). The aircraft rear indicator lights will blink rapidly from yellow
color to green color when the home point is recorded.
The Return-to-Home (RTH) function brings the aircraft back to the last recorded Home Point.
There are 3 types of RTH: smart RTH, low battery RTH and failsafe RTH. This section describes these 3 scenarios in
detail.
Return to Home (RTH)
When the GPS signal is available (more than 7 satellites is presented), use the RTH button on the remote
controller (Pic. 1) or tap the RTH button in the “M RC PRO” APP (Pic. 2) and then follow the on-screen instructions
to initiate Smart RTH. During the smart RTH, you can use the remote controller to guide the aircraft around obstacles.
You can press the RTH button again to exit RTH procedure and regain control of the aircraft.
!
● During the return home flight, the drone will fly straight to return home point and cannot avoid obstacles.
Please make sure there are no any obstacles on the path.
● Aircraft can not return to the Home Point when the GPS signal is weak or unavailable.
● Aircraft will stop ascending and immediately return to the Home Point if user moves the throttle stick in the
aircraft reaches 15 meters altitudes or beyond during Smart RTH.
● If there is no GPS signal and the remote controller signal lost for more than 6 seconds, the aircraft can not
Return-to-Home but descend slowly until land to the ground and lock the aircraft.
The low battery level failsafe is triggered when the intelligent battery is depleted to a point that may affect the safe
return of the aircraft. Users are advised to return home or land the aircraft immediately when prompted.
1. If the rear indicator light flash slow, the battery icon in transmitter LCD screen is “ ”, with transmitter has “DIDI”
sound. As only the aircraft is beyond 30 meters altitude or 100 meters distance, the aircraft will return home
automatically. As long as the aircraft is in 100 meters distance, the user can cancel the return via “ ” button.
2. When the aircraft rear lights flash slowly, battery icon “ ” is shown on the remote controller or on the “M RC PRO”
APP. And steady “beep...beep...beep” sound is heard. At this moment, the aircraft will automatically return to the
Home Point if the flying altitude is beyond 15 meters or the flying distance against the home point is beyond 15
meters. If the aircraft flying altitude is less than 15 meters or the flying distance is less than 15 meters, the aircraft
will automatically land to the ground.
-7-