Bugs 7 User Manual
How to lock and unlock the aircraft
●Unlock the aircraft
Short-press the red button “ ” . The motors rotate and the aircraft is unlocked.
●Lock the aircraft
There are 2 ways to lock the aircraft that you can find it as below:
Method 1: After the drone landing, pull the throttle to the bottom and hold for 3 seconds. The motor will stop and drone
will be locked.
Method 2: The drone will be locked automatically once no any operation in 15 seconds after unlocked.
!
Emergency stop:
● Beyond 30 meters distance and 15 meters altitude, press the “ ” and hold for 3 seconds, the drone will be
stop.
● The function is only for emergency, please don’t use it in normal flight.
Manual gyro calibration
!
After the aircraft and the remote controller are banded, set the aircraft on flat ground and follow the indication photo
as below to calibrate the gyro. Once the aircraft lights turn from flashing to solid on, it means that the gyro calibration
is succeeded.
● The gyroscope calibration was done at the factory. Gyroscope calibration is not needed unless the aircraft
can not exit the aircraft initialization detection procedure.
-24-
