Bugs 7 User Manual
Aircraft initialization detection
!
Attention: If the aircraft is always in initialization, can’t enter compass calibration. Please place the aircraft in
ground, let the aircraft do gyro calibration to exit the initialization.
After frequency matching, the aircraft will enter into initialization test. In this time, the yellow red green light flash
alternately. The aircraft will finish the initialization about 8s in ground, then enter into compass calibration.
!
● Signal connection is done once for all if the remote controller is not linked to other aircraft.
● Set the connection one by one to avoid signal connection error.
Signal connection between the aircraft and remote controller
● Keep pressing the red button “ ” and turn on the remote controller (Pic. 1). The remote controller makes 2 beep
sounds, and the indicator light “ ” keeps flashing; the remote controller is under signal connection status.
● Power on the aircraft (Pic. 2). The aircraft will make beep sounds with front and rear lights flashing and will
automatically link to the remote controller. Once the remote controller sends out a long beep sound and the indicator
light of the remote controller turns from flashing to solid on and the signal icon “ ” is shown on the LCD screen, it
means that signal connection is succeeded.
Aircraft Operations
Pic. 1
Pic. 2
-22-
