Contents of the MS3 Evaluation Kit
1.
2.
3.
4.
5.
6.
Contents of the MS3 Evaluation Kit
1
3
5
1.
MS3 evaluation board
2.
USB Control Board (I
3.
USB cable
4.
Power cable
5.
CD with MobileSound 3 Audio Suite program
DSP
6.
Adapter plugs for mini
Contents of the MS3 Evaluation Kit
MS3 evaluation board (MS3 EV-board)
Control Board (I
2
C and I
2
S) incl. 4
MobileSound 3 Audio Suite program
Adapter plugs for mini-banana to standard banana plugs
Contents of the MS3 Evaluation Kit
2
4
board)
S) incl. 4-pin I
2
C and 6-pin I
MobileSound 3 Audio Suite program, manuals, datasheet,
banana to standard banana plugs
pin I
2
S cables
, datasheet, MS3
banana to standard banana plugs
USB Control Board & Program Setup
Requirements: Windows XP (SP2), preferably a LCD screen (min. 1024x768),
Microsoft .NET Framework 2.0
1.
Install the MobileSound 3 Audio Suite program from
“..\Software\MobileSound 3 Audio suite\Setup.exe” on the CD.
- Follow the on-screen instructions.
- Use the License Key located in the CD envelope.
2.
Install the driver for the USB control board by following the listed steps:
a.
Connect the USB cable from the PC to the Control Board and wait
until the board is detected.
b.
When the “Welcome to the Found New Hardware Wizard” appear,
select “No, not at this time” to the question about connecting to
Windows Update, and press
Next
c.
Choose
Install from a list or specific location (advanced) and press
Next.
d.
On the following screen press Browse and locate the MobileSound
3 Audio Suite installation path and select the auto-generated folder
“INSTALLATION_PATH\
driverv35\” and include it in the search.
Press next.
e.
A warning may now appear. Ignore this by Pressing
Continue
Anyway.
f.
The driver is now installing…. Wait until this process is completed
and press
Finish.
3.
Check that the 4-pin I
2
C connector and the 6-pin I
2
S connector cable
from the control board to the MS3 evaluation board are connected.
4.
Connect a stereo speaker to the red and black mini-banana connections –
and an earphone to the jack plug (if required).
5.
Connect the ‘Power supply cable’, Black=GND and Red= +4.2 Vdc.
6.
Turn on the power
7.
Open the MobileSound 3 Audio Suite program from the Windows Start-
menu
Start\Programs\Bang & Olufsen ICEpower\Mobile Sound 3 Audio
Suite”
IMPORTANT
Only use the USB control board on a USB bus without any other devices
connected.
If you experience any difficulties in getting the MS3 EV-kit up and running,
please don’t hesitate to contact ICEpower for assistance.
