Bang & Olufsen DVD 2, Service Manual

Page: 9 / 70

Service Mode 2.3
Setup & Connection
Tools required
To enter Service Mode it is necessary to connect DVD 2 to a PC with a service
cable. The required tools are:
- PC with com port (if no com port is available, use USB/COM converter part. no.
33755)
- Service Cable ( part.no. 6278222 )
- HyperTerminal ( Windows Component)
Setup
The first-time setup is described below. This is a one time only procedure.
. Open PC or laptop (if no COM port is available, connect USB/COM Converter)
2. Run HyperTerminal (usually placed: Start/Programs/Accessories/Communications)
3. The ‘Connection description’ box appears on the screen
In the line ‘Name’ type ‘DVD2’ and choose an icon for the connection. Click OK.
The following appears on the screen:
In the line ‘Connect using’ choose the COM port (if USB/COM converter is used,
choose the ‘virtual COM port’ that represent the USB-converter) to be used.
Click OK.