Bang & Olufsen DVD 2, Service Manual

Page: 36 / 70

Formatting a new HDD
In case of failure the HDD is replaced by a new unformatted HDD. To prepare the
new HDD for use, it must be formatted with a ‘Master Format DVD’ via the
Diagnostic Software nucleus 2107. To carry out formatting follow this procedure:
1. Start HyperTerminal.
2. Connect DVD 2 (P1103) to a COM port (use USB/COM converter if no COM port
is available).
3. Power on DVD 2 and confirm that ‘Diagnostic info.’ appears on screen.
4. Type in command promt line DS:> 2107.
5. Screen shows: Please insert the Master DVD. When this is done, push carefully the
tray of the DVD drive. The process is completed when the screen shows:
DS:> 2107
Please insert the Master DVD <OK>
Executing transfer table 1 of 4.........
Please wait... <OK>
210700: Transfer OK
Test OK @
Example of media error could be:
DS:> 2107
Please insert the Master DVD
210704: Invalid medium, no DVD is inserted
Error @
Creating a ‘Master Format DVD’
Use same procedure as ‘Creating a Software Upgrade Disc’ see page 4.10. The file
for this procedure is ‘ MasterDVD_BHDR.zip’ (unzipped = MasterDVD_BnO.nrg)
Important: The media for this burning is not a CD-R but instead a DVD-R.
4.8 Adjustments