About the ACCESS CONTROL and CA UNITS menus …
The ACCESS CONTROL menu allows you to
lock specific TV channels or radio stations.
When you enter the EDIT CHANNEL LIST or
EDIT STATION LIST menus, you can lock (and
later unlock) channels and stations in the lists
to avoid others from watching these channels
or listening to these stations. Select the
channels or stations you wish to lock. If a
channel or station is present in, for example,
more than one GROUP and you lock it in the
CHANNEL or STATION LIST, it will be locked in
all groups automatically. Whenever you try to
access locked channels or stations, you are
asked to key in your access code.
From the factory, Access Control is not
activated. In order to use the Access Control
function, you must enable the access code.
You can then select the specific channels or
stations that should be locked.
The access code system of the DVB–T/S
Module is not the same as the pincode system
for your television, but it may be easier for
you, if you choose to use the same code for
both systems.
Contents of the ACCESS CONTROL menu …
COUNTRY …
Select which country you are in in
order to receive the correct programme provider
lists*.
PARENTAL LOCK …
Enable the access code, then
enter and confirm the code. You can lock the
channels and stations you wish when you bring
up the EDIT CHANNEL/STATION LIST menus
and bring up information on the chosen
channel by means of the yellow button. When
you lock the channel, you can also set the time
period you want the lock function to be
activated. If you do not change the time period,
it is locked all the time.
*Programme provider lists are sent out by some
programme providers. They appear and function
in much the same way as Groups and can be
brought up and seen just like Groups.
Should you forget your code …
If you forget your access code, enter the ACCESS
CONTROL menu and key in ‘9999’ three times.
The Access Control is then disabled and you must
enable the code again and enter a new personal
code.
Note: The access code described here is not the
same as the pincode you may receive with your
Smart Card. For information about Smart Card
pincode, consult information from your
programme provider.
Contents of the CA UNITS menu …
CA UNITS …
Use this menu to access the inserted
CA Module or card. The contents of the menu
depends on your programme provider.
>> SETUP menu
12
