Here you also set the highest volume level allowed in normal usage. This can be used to limit the maximum
output of the Beovision Harmony.
Bass and treble
In the
Bass and Treble
menu, decrease or increase the bass level and the treble level.
Activate loudness
The human ear is less sensitive to low frequencies when they are played at low volume levels. In other
words, when you lower the volume, the less bass you can hear. The
Loudness
function counteracts this
effect.
As you reduce the volume, the bass and treble levels are automatically increased to compensate for your
reduced perception in the outer frequency bands.
Eco mode
Make power saving settings for sound in the
Eco Mode
menu.
If you enable eco mode, the speakers that do not receive a signal when the Beovision Harmony is on
automatically switch off. Wireless speakers are not switched off when they do not receive signals from the
Beovision Harmony.
Speaker connections
Set up speakers wired or wirelessly.
Wired speakers
When setting up wired speakers, you must select which speakers you have connected to each Power Link
(PL) socket in the
Speaker connections
menu.*
*If all Power Link sockets with connected speakers are not shown in the
Speaker Connections
menu, you can
select
SHOW ALL
and press the centre button to show all Power Link sockets.
Important! If you select
Line
as speaker type in the
Speaker Connections
list, the volume will be very loud
and you cannot adjust volume
with your BeoRemote One. You must use the product’s own remote control.
'
Line
' is used for, for example, non-Bang & Olufsen amplifiers.
Wireless speakers
If you have wireless speakers in your setup, the Beovision Harmony automatically scans for wireless speakers
and associate the detected speakers with wireless Power Link channels during first-time setup. However,
you can also scan for wireless speakers and associate the detected speakers with the Soundcentre’s wireless
Power Link channels manually if you press
, select
Settings
, then
Scan for wireless speakers
and
follow on-
screen instructions.