manualshive.com logo in svg

Bang & Olufsen Beovision Harmony Series, User Manual, Page: 11 / 38

Share
Download
Bang & Olufsen Beovision Harmony Series User Manual Download Page 11

 

 

After rebooting you will be invited to pair your Beoremote One with the Beovision Harmony and to proceed 
to the B&O first time set up which includes speakers and sound configuration options to get the most out of 
your television speakers and for the HDMI set-up to be able to control any third party devices with your 
Beovision Harmony.  

  

C O N N E C T I O N S  

The Soundcenter connection well allows you to connect signal input cables as well as a variety of extra 
products, such as a set-top box or a digital media player.  

Products you connect to these sockets can be registered in the Sources menu. For more information, see the 
chapter 'SET UP CONNECTED PRODUCTS'. 

Depending on the type of product you connect to the Beovision Harmony, different cables and maybe also 
adaptors are needed. Cables and adaptors are available from your Bang & Olufsen retailer. 

  

Loudspeakers 

Use Bang & Olufsen speakers. Cables are available from your Bang & Olufsen retailer. 

You can connect up to eight speakers wirelessly. For more information, see the chapter 'SOUND SETTINGS'. 

To obtain the best possible wireless connection, it is recommended to place all wireless speakers within a 
range of approximately 9 metres (29.5 ft) from the television. 

Do not place any obstacles in front of the Beovision Harmony or wireless speakers as this may interfere with 
the wireless connection. The wireless speakers should be placed in one room and be visible from the 
television. See the guidance for your speaker for information about whether or not your speaker can be 
connected wirelessly. 

  

Products with HDMI™ output

 

Products with HDMI output such as a set-top box can be connected to any available HDMI IN socket in the 
television. For more information about how to set up connected products, see the chapter 'SET UP 
CONNECTED PRODUCTS'. 

A configured source can be selected on the Beoremote One. 

Connected products can be operated with its own remote control or you may download a Peripheral Unit 
Controller (PUC) table, if available, to use the Bang & Olufsen remote control. For more information, see the 
chapter 'SERVICE AND SOFTWARE UPDATE'. 

  

Connection panels  

Products you connect permanently to the connection panel can be registered in the 

Sources

 menu by 

pressing the centre button for each source. For more information, see the chapter 'SET UP CONNECTED 
PRODUCTS'. 

We recommend that you connect the television to the Internet to use Smart TV functions, receive software 
updates and to download Peripheral Unit Controller (PUC) tables. PUC tables enable you to operate 
connected non-Bang & Olufsen products with your Bang & Olufsen remote control. 

Summary of Contents for Beovision Harmony Series







































Reviews:

No comments