You can save snapshots which can be activated by the Mybuttons. Your television must be switched on and a
source must be selected.
1.
Press and hold one of the Mybuttons, to bring up a list of items you can include in the snapshot.
2.
Highlight the different items and press the centre button to enable or disable them.
3.
Highlight Save and press the centre button to save the settings.
If you want to remove a snapshot from a button, you can select Clear or uncheck all items.
If you save a snapshot with a button where a snapshot has already been saved, the existing snapshot will be
replaced by the new one.
Use a snapshot
Use a desired snapshot when you watch television.
1.
Press the button dedicated for the desired snapshot.
When you activate a saved snapshot, the settings are temporary and will be in effect until you adjust the
settings, select another source, or switch the television to standby.
If the item saved as a snapshot is no longer available, the snapshot will still be activated, but the item played
will follow normal source behaviour for the selected source.
U S E S P E A K E R G R O U P S A N D S O U N D M O D E S
You can extend your Beovision Harmony into a surround sound system by adding Beolab loudspeakers and
subwoofers.
When you switch on a source, the Beovision Harmony automatically selects the appropriate sound mode for
the source you are using. However, you can select another sound mode at any time. Also, when you switch
on the Beovision Harmony, the Start-up speaker group is selected automatically. However, you can always
select another group of activated speakers if you want to listen to music without having to sit in front of the
Beovision Harmony, for example, when you sit at the dining table or in an armchair. You can adjust the
settings of the sound modes and set up speaker groups. For more information about sound modes and
speaker groups, see the chapter 'SOUND SETTINGS'.
When you configure a source, you can set a sound mode to be selected automatically each time you switch
on the source. For information about preset selection, you can read about speaker groups in the chapter
'SOUND SETTINGS'.