Adjustments, English 1.27
Chassis adjustment
CVBS picture adjustment
1 – 5 Dynamic range of the picture.
1, 2 & 3
Rdr, Gdr & Bdr
Red-, Green- & Blue drive
Is used to adjust the white level.
4 Bri
Brilliance
Is used to adjust the black level.
5 Con
Contrast
Is used to adjust the contrast.
10 – 12 Calibrate the user setting, Brilliance, Colour & Contrast.
10 BRIOF
Brilliance offset, calibrate the Brilliance adjust in the user menu.
11 CONOF Contrast offset, calibrate the Contrast adjust in the user menu.
12 COLOF Colour offset, calibrate the Colour adjust in the user menu.
17 Gain adjust 7115 & 7118.
Is used to dynamic range of the CVBS colour decoder.
RGB picture adjustment
17 Gain adjust R, G & B.
Is used to adjust the white level.
Plasma Display Panel driver adjustment
6 WPR & 7 WPB
White Point Red & White Point Blue.
Is used to adjust the white level.
8 RCT & 9 BCT
Red cut off & Blue cut off.
Is used to adjust the grey level.
17: CVBS gain adjustment
Setup
TV – MENU – Setup – 0 - 0 – GO – Monitor – Picture adjustments
Input
Tuner, V.TAPE or AV
Test picture 4:3 or 16:9, for example from test tape
Brilliance
Colour
Contrast
32
32
20
Menu
7115
7118
R
B
G
Limit
Label
Label
Label
label
label
OFF
Adjustment with VTR and test tape
1. Set colour decoder 7115 to the value on the label.
2. Select colour decoder 7118 and adjust for same brightness.
3. It may be necessary to toggle several times between the two decoder.