Replacing modules, English 1.23
Transfer picture adjustment values to 6IC6
Transfer after replacing the main chassis
Important
The EEPROM 6IC6 contains, user set up and the data for picture adjustment.
In order to avoid loss of data, the old EEPROM 6IC6 must be transferred to the
new PCB6.
The correct data for the picture adjustment must be written into the EEPROM,
6IC6. The data are printed on the label placed on PCB2.
Transfer of picture adjustment values are done in Service mode.
Enter service mode, press on the Beo4
TV Menu 0 0 GO
Enter data
Select the Monitor line and press
GO
. Now the Monitor service menu appears.
Select the Picture adjustments line in the Monitor service menu and press
GO
.
Place the cursor on the first item and press
GO
. Now a sub menu appears.
Press
l
or
n
to adjust to the value written on the label.
Press
p
to step to the next sub menu and adjust to the value written on the label.
Repeat until all values are entered.
The values are
-
Rdr, Gdr, Bdr, Bri, Con
-
COLOF
-
Gain adjust
-
7115, 7118, R, G, B
Press
GO
to store the adjustment.
Rdr
Gdr
Bdr
Bri
Con
COLOF
Gain adjust
7115
7118
R
G
B
