Adjustments, English 1.25
Picture adjustment
General considerations
-
Correct adjustment of all parameters can only be obtained by using special test
signals and equipment for light measurement.
-
Factory values will result in the best result.
-
The values are placed on the label. See page 1.23.
-
All values are stored in the EEPROM.
Menu
Chassis
1
Rdr
Red drive
Label
2
Gdr
Green drive
Label
3
Bdr
Blue drive
Label
4
Bri
Brilliance
Label
5
Con
Contrast
Label
Plasma
Display
Panel
6
WPR
White Point Red
Only EEPROM
7
WPB
White point Blue
Only EEPROM
8
RCT
Red Cut off
Only EEPROM
9
BCT
Blue Cut off
Only EEPROM
10
BRIOF
Brilliance Offset
Only EEPROM
11
CONOF
Contrast Offset
Only EEPROM
Chassis
12
COLOF
Colour Offset
Label
13
Delay
Master delay
50
14
Colour temp
NORM
15
Comp filter
ON
16
Movie mode
ON/OFF/AUTO
Chassis
17
Gain adjust
7115, 7118,
R, G, B
Label
Chassis
18
Colour adjust
Adjustable
13 Delay
0 – 100 ms
(default 50ms)
Delay the sound so that picture and sound is synchronised.
14 Colour temperature COLD/NORM/WARM
(default: NORM)
Set the colour temperature on the PDP.
15 Comp filter (default ON)
Comp filter ON:
Better separation of chroma and luminance compared to the conventional
separation. On critical signals there is a risk of incorrect colour identification. When
the signal is changed from SECAM to PAL the colour might synchronize to the
wrong colour system.
Comb filter OFF: Conventional chroma and luminance separation.
16 Movie mode
On/Off/Auto (default Auto)
Movie mode reduces judder in movies, for example better quality when panning.
If you experience a disturbing quality in scrolling text/titles that are more annoying
than the judder, you can disable the movie mode.
Movie mode On/Off:
On/Off in all formats.